Home / Conveying / Transport conveyor / Transport conveyor FB

Transport conveyor FB

This transport conveyor is designed to convey the organic dirt from the drainage water of the washing line. Water is cleaned through the belt, while dirt stays behind and is transported away.

This transport conveyor is designed to convey the organic dirt from the drainage water of the washing line. Water is cleaned through the belt, while dirt stays behind and is transported away. A filter mill is included at the end of the belt to take out dirt that sticks to the belt.

Depending upon your produce, the belt can be supplied with a square opening of 1 mm, 2 mm, and 3 mm. An on demand frequency inverter can be added to control the speed of the belt.

An extra motor can be included on demand to ensure the belt can move both ways. If this option is selected, the originally selected power (kW) must be divided between the two motors.

Characteristics

  • On demand, a square can be supplied with openings of 1 mm, 2 mm, and 3 mm
  • A frequency inverter can be added on demand
  • An extra motor can be included on demand
  • On demand, the machine can be supplied in stainless steel and mild steel
  • Available in 40, 60, 80, 100, and 120 cm width
  • On demand, the conveyor can be supplied with a product sensor on and off the conveyor to detect the level of the waste Inside the dirt box
  • Various lengths of conveyor are available according to your line design

Specifications

FB 40 FB 60 FB 80 FB 100 FB 120
Width of the machine (cm) 40 60 80 100 120
Length of the machine (cm) 125 t/m 1000, steps of 25 cm

OptionsItems marked with * are optional

  • Material and treatment (frame)
Stainless steel
Frame is made from stainless steel AISI304. The bearings and drive/idle rollers are from mild steel
  • Belt
Mesh square opening 1 mm
Mesh belt, with square opening of 1 mm
Mesh square opening 2 mm
Mesh belt, with square opening of 2 mm
Mesh square opening 3 mm
Mesh belt, with square opening of 3 mm
  • Electrical control
No electric
Motors and necessary sensors
Stand-alone
Motors, necessary sensors and control panel. The length of the cable is 5, 10, 15 or 20 meter
Central control in line
Motors and necessary sensors
  • Frequency inverter*
Speed adjustment
A frequency inverter is included to control the speed
  • Material and treatment (electrical panel)
Painted mild steel
The electrical panel is made from painted mild steel
Stainless steel
The electrical panel is made from stainless steel AISI304
  • Material and treatment (legs)*
Stainless steel
It is made from stainless steel AISI304
Painted mild steel
It is made from painted mild steel
Galvanized steel
It is made from galvanized steel
  • Length of legs*
Length of legs
0 – 7 meter
  • Switch*
Maintenance
A maintenance switch is included
Reverse
It is used to change the direction of the belt
Start/stop
It is used to start and stop the belt
  • Product sensor*
Sensor
The product’s height is determined by the product sensor
  • Bracket*
Bracket
Bracket is used to mount the product sensor
  • Motor on top*
On top
The motor is placed on top of the machine
  • Extra motor*
Extra motor
An extra motor is included to make sure the belt can move both ways. Available options are 0.37 KW, 0.75 KW, 1.1 KW, 1.5 KW, 2.2 KW or 3 KW. If this option is selected, the originally selected power (kW) must be divided between the two motors

Make an inquiry

    Allround Vegetable Processing value your connection. Rest assured, we respect your privacy and will use this information responsibly. We look forward to providing you with exceptional vegetable processing solutions for all your vegetable processing needs.

    Make an inquiry

      Allround Vegetable Processing value your connection. Rest assured, we respect your privacy and will use this information responsibly. We look forward to providing you with exceptional vegetable processing solutions for all your vegetable processing needs.